Touring Products

AMPLIFIERS

KDX & KQX Series
The KDX / KQX series is a range of premium quality, compact size, high power amplifiers designed for live performance use as well as for permanent installations. The KDX / KQX models are based on Class D output circuit controlled by a proprietary modulator patented by KIND Audio. Thanks to the high efficiency (more than 85%) Class D output circuit, dramatically reduce power distribution demands compared to older high power amplifiers. Other great advantages of this technology are: low heat dissipation, compact size, and KIND sonic integrity. A switchmode technology power supply replace a large heavy AC transformer with a highly efficient and light weight modular design. The KDX / KQX series have an open input architecture and can have as option a Digital Signal Processing board (KIND DSP board-1) and a remote control that allows monitoring of all key amplifier parameters: power on/off, channel mutes, and channel solo functions.
	KDX 2 Channel Models The 2-channel KDX Series amplifiers give you seven models available. KDX 9.2 \| KDX 14.2 \| KDX 18.2 \| KDX 24.2 \| KDX 30.2 \| KDX 34.2 \| KDX 38.4
	KQX 4 Channel Models The 4-channel KQX Series amplifiers give you four channels in only two rack spaces - without compromising on power. KQX 16.4 \| KQX 22.4 \| KQX 28.4

DDX & DQX Series
The DDX / DQX series is designed for the most demanding live audio users, whether in touring rigs or fixed installations. Seven models with two channel and six model with four channel offers range in power from 450 watts to 1900 watts per channel at four ohm all in 2 RU space chassis that are only 455 mm (17.91") deep and 10 kg (22 lbs). The DDX / DQX models are based on Class D output circuit controlled by a proprietary modulator patented by KIND Audio. The great advantages of this technology are: low heat dissipation, compact size, and KIND sonic integrity. Reactive "back EMF" from the speaker is recycled to the power supply, and an efficiency higher than 85% keeps AC power needs to a minimum, while delivering more energy to the speaker. The high efficient global power supply is regulated (R-SMPS), works anywhere in the world and offers PFC (Power Factor Correction). The regulated power supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20% below its nominal level e.g. to 180VAC instead of 230VAC without any loss of the amplifier’s rated output power.The DDX /DQX series have an open input architecture and can have as option a Digital Signal Processing board (KIND DSP board-1) and a remote control that allows monitoring of all key amplifier parameters: power on/off, channel mutes, and channel solo functions.
	DDX 2 Channel Models The 2-channel DDX Series amplifiers give you seven models available. DDX1522 \| DDX2022 \| DDX2422 \| DDX3222 \| DDX3622 \| DDX4022 \| DDX3842
	DQX 4 Channel Models The 4-channel DQX Series amplifiers give you a very high power density and stable power eaven with mains voltage fluctuations. DQX3024 \| DQX4024 \| DQX3044 \| DQX4044 \| DQX4844 \| DQX6044 \|

DD+ & DQ+ Series NEW
Preliminary Info
	DD+ Channel Models The 2-channel DD+ Series amplifiers give you five models available. DD+3600 \| DD+4000 \| DD+5000 \| DD+6400 \| DD+8000 \|
	DQ+ 4 Channel Models The 4-channel DQ+ Series amplifiers give you a very high power density and stable power eaven with mains voltage fluctuations. DQ+5000 \| DQ+6000\| DQ+7000 \| DQ+8000 \| DQ+10000 \|

NWX Series

The NWX series are light weight amplifiers, ideal for use in high quality touring sound systems as well as in permanent installations. The NWX models are based on class H circuitry, for power efficiency and high quality sound performance. NWX models has been designed with the objective to reduce weight and improve sonic transparency, noise and versatility, further to incorporate the ultimate protection systems. An high efficiency Switch Mode Power Supply has been used as modern solution for the weight reduction. KIND SMPS has been designed to be integrated into our amplifier design. In contrast to other designs, we have managed to produce a SMPS that has the same characteristics as a conventional supply eliminating the need of limiting on the secondary side of the switch transformer, to guarantee the maximum current pulse under requiry, the audible results are a deep and fast bass and crisp, clean sound.

The NWX series have an open input architecture and can have as option a processing board and a remote control that allows monitoring of all key amplifier parameters: power on/off, channel mutes, and channel solo functions.

NWX Models

The flagship model is the NWX 5.0 with 3350 watts per channel (2 ohms) and a dual mono topology. For lower power applications, the other models offer the same feature set.
NWX 1.9 | NWX 2.8 | NWX 3.4 | NWX 5.0 DMV

AMPLIFIER'S ACCESSORIES

DSP
The DSP Board-1 input card can provide all of the functions of a loudspeaker system crossover/controller without the need for an external processor. Suitable for KDL, KDX, KQX, DDX and DQX series amplifiers, the 2-in / 3-out processor has crossover, EQ, compressor and delay functions, providing a cost effective and tamper-proof system solution for most applications.
	DSP-Board 1

WinARC
WinARC (Amplifier Remote Control) is a software designed to remote by PC the NWX models switching Amplifiers from KIND and all the new generation of KIND Power Amplifiers. WinARC works by RS485 interface with distance up to 1 Km and control up to 99 Amplifiers linked between them with a simple RJ connector and telephone or cat. 5 data cable. All parametres like signal In/Out, output current, working status (Bridge or Parallel Mono), and Amplifier's temperature are monitorred; allert icons announce possible anomalies. For each Amplifier through the PC interface is possible adjust the output level and set up Mute and Solo function. WinArc automatically recognize all Amplifiers connected to the Network, the Amplifiers can also be assigned in a group and more than one group can be created to control simultaneously Level, Mute, and Solo function for all amplifiers in the group by a single Windows. With WinArc is possible save a session file with place and loudspeaker system used in the event.
	WinARC