|
|
|
KDX & KQX Series
|
|
The KDX / KQX series is a range of premium quality, compact size, high power amplifiers designed for live performance use as well as for permanent installations. The KDX / KQX models are based on Class D output circuit controlled by a proprietary modulator patented by KIND Audio. Thanks to the high efficiency (more than 85%) Class D output circuit, dramatically reduce power distribution demands compared to older high power amplifiers. Other great advantages of this technology are: low heat dissipation, compact size, and KIND sonic integrity. A switchmode technology power supply replace a large heavy AC transformer with a highly efficient and light weight modular design.
The KDX / KQX series have an open input architecture and can have as option a Digital Signal Processing board (KIND DSP board-1) and a remote control that allows monitoring of all key amplifier parameters: power on/off, channel mutes, and channel solo functions.
|
 |
The 2-channel KDX Series amplifiers give you seven models available.
KDX 9.2 | KDX 14.2 | KDX 18.2 | KDX 24.2 | KDX 30.2 | KDX 34.2 | KDX 38.4
|
|
KQX 4 Channel Models
The 4-channel KQX Series amplifiers give you four channels in only two rack spaces - without compromising on power.
KQX 16.4 | KQX 22.4 | KQX 28.4
|
|
DDX & DQX Series
|
|
The DDX / DQX series is designed for the most demanding live audio users, whether in touring rigs or fixed installations. Seven models with two channel and six model with four channel offers range in power from 450 watts to 1900 watts per channel at four ohm all in 2 RU space chassis that are only 455 mm (17.91") deep and 10 kg (22 lbs). The DDX / DQX models are based on Class D output circuit controlled by a proprietary modulator patented by KIND Audio. The great advantages of this technology are: low heat dissipation, compact size, and KIND sonic integrity. Reactive "back EMF" from the speaker is recycled to the power supply, and an efficiency higher than 85% keeps AC power needs to a minimum, while delivering more energy to the speaker. The high efficient global power supply is regulated (R-SMPS), works anywhere in the world and offers PFC (Power Factor Correction). The regulated power supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20% below its nominal level e.g. to 180VAC instead of 230VAC without any loss of the amplifier’s rated output power.The DDX /DQX series have an open input architecture and can have as option a Digital Signal Processing board (KIND DSP board-1) and a remote control that allows monitoring of all key amplifier parameters: power on/off, channel mutes, and channel solo functions.
|
 |
DDX 2 Channel Models
The 2-channel DDX Series amplifiers give you seven models available. DDX1522 | DDX2022 | DDX2422 | DDX3222 | DDX3622 | DDX4022 | DDX3842
|
 |
DQX 4 Channel Models
The 4-channel DQX Series amplifiers give you a very high power density and stable power eaven with mains voltage fluctuations.
DQX3024 | DQX4024 | DQX3044 | DQX4044 | DQX4844 | DQX6044 |
|
|
XT Series
|
|
The XT Series amplifiers from KIND offer true professional quality, performance and road-proven reliability. XT models are designed to work hard into 2 ohm loads. Four 3 RU models, designed with dual mono topology, provide 900 to 2400 watts per channel at 2 ohms (FTC continuous average). All four models feature a compact chassis deep 453 mm (17.8").
KIND’s XT series represents state-of-the-art in professional quality performance. Every model perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the XT4000 is optimized to deliver high levels of sustained power with extraordinary audio performance.
|
 |
XT Models
All models feature dual mono topology, high current power supplies and rock solid reliability.
XT1000 | XT2000 | XT3000 | XT4000
|
|
MCX Series
|
|
Designed for permanently installed sound systems where rackspace is at a premium, KIND’s MCX series provide unprecedented levels of channel density for multichannel amplifiers. The MCX 84-6 and MCX 124-6 provide 80 watts and 120 watts per channel at 4 ohm respectively. A four or six channel amplifier can be easily transformed in a stereo or three channel amplifier doubling its power and this is value for your investment, XLR inputs offers professional connection way. MCX are really complete for their filed application, because fitted with internal x-over and with Clip limiter. High quality, reliability, sound performance and best value make them very attractive.
|
 |
The 4-channel MCX Series amplifiers give you two models available.
MCX 84 | MCX 124
|
 |
The 6-channel series provides six channels of power in only two rack spaces, providing a good level of channel density for multi-channel amplifiers.
MCX 86 | MCX 126
|
|
TMK1 distributed lines Transformers Mounting Kit
|
|
The KIND TMK1 is a 2U rack mounting kit for distribution line transformers, user configurable, that can house up to six 50-90W or up to three 200/300/400W line tranformers. Mixed configuration of three 50-90W plus three 200/300/400W line transformers are obtainable. The XF- line transformers are user mounted inside of TMK1 and the available standard version has a 100V output, 70V version is available on demand. Thanks to the special winding and the natural behaviour of the toroidal core, the KIND line transformers have a wide frequency response which makes them ideal for high quality musical systems.
|
  |
TMK1
|
|
DSP
|
|
The DSP Board-1 input card can provide all of the functions of a loudspeaker system crossover/controller without the need for an external processor. Suitable for KDL, KDX, KQX, DDX and DQX series amplifiers, the 2-in / 3-out processor has crossover, EQ, compressor and delay functions, providing a cost effective and tamper-proof system solution for most applications.
|
 |
DSP-Board 1
|
|
|
|
